The ZGS11-Z. T series photovoltaic on-site boosting substation is designed to meet the increasing power supply requirements of the rapidly growing photovoltaic power generation, which is a clean energy production method. Developed by our company based on the digestion and absorption of advanced domestic and international technologies, this series of products is produced on the basis of 10kV and 35kV combined transformers. The product integrates the transformer, load switch, and high-voltage fuse into the transformer’s enclosure. It utilizes the transformer’s insulating liquid as the insulation and heat dissipation medium for the entire product, adopts a fully sealed structure, and has a split shell. The surface treatment, including shot blasting, pickling, phosphating, primer, intermediate coat, and topcoat, surpasses the strength of ordinary spray coatings in terms of resistance, thickness, and UV resistance. The product has the advantages of small size, light weight, and easy installation.
Ambient Condition
Altitude not exceeding 3000m
Ambient temperature range: -40°C to +45°C
Outdoor wind speed not exceeding 30m/s;
Relative humidity: Daily average not exceeding 95%, monthly average not exceeding 90%
The waveform of the power supply voltage is approximately sinusoidal, and the three-phase power supply voltage is approximately symmetrical;
Installation location: Installed in places without fire, explosion hazards, severe pollution, chemical corrosion, and severe vibration.
If conditions exceed the normal operating environmental conditions mentioned above, users can negotiate with our company for a solution.
Note: The image is for reference only; please refer to the actual product.